Milwaukee self feed wood bits

[markfxy]

They're not for cabinet hinges the screw on the end is designed to pull the cutter through the timber why would you have sizes form 20mm to 65mm if that was their purpose Milwaukee Self Feed Bits, Selfeed Bits

 

[Howsie]

Auger bits and the slow gear on your drill should be all you need really.

 

[brasso1981]

Well they look like forstner bits. My brothers a joiner and uses them. Not milwaukee ones but they look similar. His have the same bit on the end. Im not saying there only for hinges. But thats what forstner bits are for

 

[sky]

we use irwin blue with a 36v bosch drill driver for joists etc

 

[Howsie]

we use irwin blue with a 36v bosch drill driver for joists etc

Same here but on 18v matika. No issues apart from some brused knuckles...

 

[PatrykA]

I have the milwaukee hole hawg which works great.

 

[markfxy]

whats a hole hawg?

 

[PatrykA]

1/2" Hole-Hawg® Drill | Milwaukee Tool

These bits are not meant to be used on cabinets unless you want to got through them. They eat wood. Forstner bits do not self feed. These have a threaded bit at the tip which helps pull them through. You really want to avoid hitting nails or you will chip the cutting surface and these bits are expensive. Milwaukee also makes a set with replaceable blades but are more money.