Discuss Low pressure at hot tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 1,241
Cheers Mik, but in cALCULATIONS, this would not be 98.1m2 to the speed of the cold feed! NO?
- Status
Reply to Low pressure at hot tap in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Can anyone remember the Mira mixer shower that would work down to a really low pressure on a vented hot water system without a shower pump?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
- Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't...
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix.
Last week the right hand hot tap makes...