Search the forum,

Lots of unrelated adds on forum

Post new thread

Discuss Lots of unrelated adds on forum in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
jtsplumbing

jtsplumbing

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,738
Been noticing lots of strange unrelated adds appearing on the forum, seem to be advertising health issues etc. why are these allowed to appear, thought advertising had to be paid for ??
 
It looks like they are setting up profiles then posting there links. @ShaunCorbs is deleting them all. But do not think he can get around them quick enough.
 
I've brought it up to Lou and dan a few times but nothing's been done yet, it's averaging 10-15 a day sometimes like this last week 20 posts a day

Sometimes I'm lucky and notice them within a min or two and get rid of them

Think the only way other than ban anyone from Pakistan is to put any new person on post mod/ validation

Sorry guys wish you didn't have to see them
 
ShaunCorbs said:
I've brought it up to Lou and dan a few times but nothing's been done yet, it's averaging 10-15 a day sometimes like this last week 20 posts a day

Sometimes I'm lucky and notice them within a min or two and get rid of them

Think the only way other than ban anyone from Pakistan is to put any new person on post mod/ validation

Sorry guys wish you didn't have to see them
Click to expand...
Just feel sorry for you mate. Bet there are not enough hours in the day:p:p
 
Status
Not open for further replies.

Reply to Lots of unrelated adds on forum in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
Posting a thread as until now I've only read the forum
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
0
Views
27
Bob Kerr
B
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
321
Chuck
C
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
123
fowlerboi
F
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
110
Lou
Lou
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
249
oz-plumber
O
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock