Search the forum,

Looking for experiance in newcastle/ North east will work for free.

Post new thread

Discuss Looking for experiance in newcastle/ North east will work for free. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

Johnabbs

Hi everyone

my name is John I am 32 and I am starting a ccn1/ BPEC gas foundation course in July.
i have experiance fitting bathrooms ect..
With ten years in the building trade working with a builder so I am used to working in and around customers homes.
I am looking for any experience from plummers gas engineers and I willing to work for free from monday to Sunday.
Morning or night. As this will be the best way to build up my knowledge of the industrie.
I am a hard worker with my own car to travel to Jobs.
With all my PPE.
I currently work but if anyone can offer me work/experiance I am more than willing to put my notice in early as i am due to put it in around June.
Once I have completed my course again if anyone will help me now I will work for cheap after.
I live in newcastle but again I will be prepaired to travel.
Any help would be very much appreciated.

Thanks for taking the time to read this.

John.
 
Status
Not open for further replies.

Reply to Looking for experiance in newcastle/ North east will work for free. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
324
Chuck
C
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
451
FozzieBear
F
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
199
mutley racers
M
S
Using coil to clear pipe leading to gutter
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
52
Chuck
C
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
187
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

UK Tiling Forum
UK Tiling Forums
Tilers Forums UK
Tiling Tools for Beginners
Tile News
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock