Kitchen Sink Trap Leaking

[Callaghan88]

Hi guys. There's a bit of reading in this but I'll try keep it short as possible.

We noticed water under the wooden floor in our kitchen. It turns out it was because the hot tap - which you couldn't fully turn off - which was tripping behind the sink unit and then on to the floor.

The hot tap was replaced and voila, no more leakage from the tap and no more water under the floor.

But now we've noticed water directly under the sink, where we keep tea towels and stuff. I'll attach photo.

Any ideas on moving forward?

 

[ShaunCorbs]

Have you knocked the trap eg out of the pipe ?

 

[Callaghan88]

Have you knocked the trap eg out of the pipe ?

Hi Shaun. Sorry mate no idea what the trap is. But there's been no tampering with the pipes as far as I know.

 

[ShaunCorbs]

The white part left in the photo

 

[Callaghan88]

The white part left in the photo

Ah I see. No that hasn't been touched Shaun. Do you think the trap could be the problem?

 

[ShaunCorbs]

Don’t know might of got knocked when replacing the washing machine valve best to dry everything off and fill the sink bowl up and then pull the plug and let it drain and watch where the water comes from

 

[Callaghan88]

It isn't coming from the trap as it turns out. I think it's coming from the taps. The leak is dripping from directly underneath there, the unit where the hot tap, cold tap and middle bit is. There's droplets of water that look like beads of sweat forming around it.

For a novice DIY person what's the skill level to replace this do we think?

 

[Callaghan88]

I'll attach some photos.

 

[ShaunCorbs]

It’s coming from the centre spount swivel you can get new orings but tbh normally just swap the deck mount mixer

 

[Callaghan88]

Cheers Sean. Do you think this is an advanced repair or would someone like myself manage it in your opinion?