Discuss kinked, crimped and coiled 8mm pipework in the Plumbing Jobs | The Job-board area at PlumbersForums.net
I would repipe everything if it was my house. I probably would do new notches in proper places if floorboards not being replaced with sheeting.
Notching elsewhere isn't going to weaken already notched joists
I am thinking it is supposed to be clipped every 300mm. Good luck with that.
Copper for me, so only need to support it or clip it every 1.2 or 2 metres.
Cheers Shaun. Just fitting the rads now. Planning on pulling the one pipe that is overlapping at the end, the rest aren't touching so should be good... Or will I be OK leaving that overlapping pipe
Reply to kinked, crimped and coiled 8mm pipework in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.