J
jambo
hey guys got a unvented system will be starting soon customer wants mixer shower but and this is a big but mains pressure is only 1-1.5 bar need serious advice on this one please cheers guys
Discuss jambo in the Plumbing Jobs | The Job-board area at PlumbersForums.net
it would not workoh dear not good news is ther no way round this problem at all house is that big it has two vented cylinders runnin off a worcester reg boiler HELP job comin next week what would be the outcome if fitted on this low pressure mains
sorry dident se this first what about renewing like for like,converting to fully pumped and raising the head of the tanks if possible this will give a pretty good showeroh dear not good news is ther no way round this problem at all house is that big it has two vented cylinders runnin off a worcester reg boiler HELP job comin next week what would be the outcome if fitted on this low pressure mains
what is the min you can run an unvented bar wise
not sure yet is ther a calculation you can work out with the mp or has to be done with a flow cup
hot is same as cold which is gravity fed
Pump needs to be a certain distance below the tank, ideal next to the cylinder.cheers bud
for speed wd it not be easier to put pump on in loft to feed the unvented in which case where is the pump situated
Reply to jambo in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.