Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss imperial thermostatic mixer shower? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

obseen16

Plumbers Arms member
Plumber
Gas Engineer
Messages
835
does anyone know if any of the imperial mixer showers can have the thermostat adjusted for better temperature? this one is about 6 months old runs off a pump, pump is fine but shower runs luke warm and wont get hot/ wont stay hot. have cleaned the thermostat but not made any difference.

any advice?

Cheers, J
 
hi, there is usually a grub screw inside the centre of the spindle and if you turn it anti clockwise that should raise the temp.

hope this helps.

saltire
 
Status
Not open for further replies.

Reply to imperial thermostatic mixer shower? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON...
Replies
6
Views
274
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
261
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
439
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock