Search the forum,

imperial pipe to metric using compressions?

Post new thread

Discuss imperial pipe to metric using compressions? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
O

obseen16

Plumbers Arms member
Plumber
Gas Engineer
Messages
835
hi all,
simple question really but does anyone know if you can use a 22mm compression coupling on the old imperial pipe?

i know i can get metric to imperial (22mm x 3/4") couplings in end feed but i cant use one of these fittings on this bit. or can u get these in compression versions?

J
 
You could use the standard 22mm compression coupling with a imperial olive for the imperial pipe side..
 
Status
Not open for further replies.

Reply to imperial pipe to metric using compressions? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

J
Old pipework size in bathroom
Hi I've had to cut hot and cold feed to re route for bathroom feeds. The 22mm Copper pipe hot feed is slightly smaller then my 22mm Copper. Solder fittings just slip over it and are really loose so I gather this is old imperial pipe, so I shall use a 3/4 to 22mm coupler. However on the...
Replies
3
Views
523
JonesJ89
J
T
22mm MDPE connection
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
296
ShaunCorbs
ShaunCorbs
JohnnyZenith
Looking to see what iron pipe part can fit a 10mm ball joint?
Looking to see what iron pipe part can fit a 10mm ball joint? In this pic there is a part that connects the ball joint (or whatever they are called) to the 1/2 inch pipe. I am looking to connect to a 3/4 inch pipe. Are there any threads that do this? Thanks I have been told that in North...
Replies
12
Views
778
Ben-gee
B
N
How Yo Connect Water Supply To New Bath Taps
Hi I have a 22mm hot and cold water supply to new bath. The pipes finish with compression valves. I need a 500 mm tap connector hose to connect with half inch thread on the new bath tap. All the connectors at the main plumb merchants are 22mm x 3/4 inch. No one seems able to answer question...
Replies
5
Views
500
PETE 123
P
S
Identifying 3/4" copper from 22mm copper.
I'm a kitchen fitter first and foremost, so occasionally encounter old pipes of varying sizes. From past experience I know how easy it is to misidentify old 3/4" copper pipe (apart from getting soaked when you get it wrong) and would like to know if there is a surefire way of telling it from...
Replies
10
Views
438
Soulmonger
S
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Plumbing Advice
Tile Blog
British Standards in Tiling BS5389
Tile Advice
Tiling Forum UK
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock