Search the forum,

Discuss ideal standard concord wrs 40, buzzing when heating the water. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
1
Our gas central heating boiler (30 plus years old (plus)) has developed a very load buzzing noise.
The noise starts whenever the boiler kicks in to bring the radiator water back up to temperature. (very occasionally the buzzing does not happen - but it is rare)
The boiler is used for heating the house, not tap water, and is situated next to the kitchen sink.
If this is the thermostat or gas valve - how can one tell & could they still be available ( I cannot actually see any part number labels). Also is it dangerous to use the boiler in its present condition.
As I understand it, when we replace the boiler we are going to have to have all the pipework replaced due to the current pipes not being the correct diameter, so preferably we would like to get the big job done in the spring. Following on we would like to keep the present boiler going till then.
IMG_20181220_164535_resized_20181220_044930208.jpg

This is a toe in the water exercise for background info, before I start contacting local Gas Safe techs/installers.
 
I know what it is straight away. It's many years since I enquired about spares but, at the time I could get some parts. It is best practice to get a GSR in to diagnose the fault. He will know who to go to locally to get the correct spares.
 

Reply to ideal standard concord wrs 40, buzzing when heating the water. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
140
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
481
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
344
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
245
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock