Search the forum,

Discuss Ideal logic combi 30 problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
1
hi all

Seem I've had a few problems lately with this little gem of a boiler, she's about 7 years old.

Usual issues, pressure dropping, needed topping up every 3-4 days

Not visible leaks detected.

Then the hot stopped working so I changed the flow turbine which solved the problem also while I had my head in the boiler I changed the expansion vessel which was a good call as full of water, bought one off eBay, not quite the right size but made it fit.

Boiler worked fine for a couple of days but now is losing pressure badly every day needs topping up, still can't see any visible leaks inside, however the condensation (plastic pipe) out side I can see water has been coming out.

I'm going to change the prv this week to rule that out.

Any help would be great

Thanks

James
 
You must be Gas Safe to take the case off your boiler. Otherwise you are working on the boiler illegally. You need to send your gas safe number to @Lou or @Dan and they will sort you out.
 
Status
Not open for further replies.

Reply to Ideal logic combi 30 problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
139
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
178
PSxxxxxx
P
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
231
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
133
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock