Search the forum,

Hive Heating and hot water with bronze pump connection

Post new thread

Discuss Hive Heating and hot water with bronze pump connection in the Central Heating Forum area at PlumbersForums.net

P

pete40

Messages
10
Hi all
Customer has purchased hive hot water and heating unit.
The current programmer is an ESI 3247b 3 channel.
Wiring for the hot water on 3 heating on 4 but on 6 is the connection for the pipe stat/bronze pump.
Is there a way around this as the hive doesn’t appear to allow connection for bronze pump.
Thanks for any assistance.
 

Attachments

  • B734882B-E7D3-4791-B9A9-77A6ADA1E98B.jpeg
    B734882B-E7D3-4791-B9A9-77A6ADA1E98B.jpeg
    372.3 KB · Views: 4

Reply to Hive Heating and hot water with bronze pump connection in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
301
oz-plumber
O
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
231
oz-plumber
O
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
338
Chuck
C
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
189
dreikher
dreikher
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
251
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers Forum
Tiling Tools
Electrical Blog
Tile Talk
Tilers Talk
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock