Hi...I'm new and after some advice on Dream air source heat pumps!

[CJW]

Hi, My name's Carl and I'm a builder. I'm currently renovating our family home and I'm interested in fitting an air source heat pump. I've got a plumber and electrician who can install it but I'm trying to get some information on Dream air source heat pumps as these are the only pumps I can find to buy from an independent seller for a reasonable price. Has anybody got any experience of a Dream air source heat pump (installing/using) or give me any information on what I should be looking for in an ASHP?
Kind regards, Carl

 

[SimonG]

Welcome along

 

[dancinplumba]

welcome along

 

[lame plumber]

get a plumber who knows about ashp technology and take his advice or talk to worceter bosch or another manufacturer. All manufacturers sell to most merchants so dont see an issue with purchase price!

 

[SimonG]

Purchase by manufacturer, preferably one suited for the Scandinavian market. Last thing you want is it not to be able to warm the house on the coldest of days.

 

[Gray0689]

I have seen a few houses done with this ashp

And very impressed with what they are doing

Both in approx 3500 square feet houses
And really good heating from them

 

[Howsie]

Sizing is everything. Get someone who knows what they're doing or you'll end up with a box and large electricity bill.

 

[lame plumber]

:iagree:

 

[Rickster123]

Welcome along

 

[Dotty]

Welcome to the forums Carl, a builder asking advice so the job can be done properly?

You're like a breath of fresh air. Some good advice given already!

 

[Gray0689]

Sizing is everything. Get someone who knows what they're doing or you'll end up with a box and large electricity bill.

That is the most important aspect of any asph
Sizing is everything totally agree

 

[turnpin]

Hello cjw and welcome good to see you using the forum for sound advice and glad to see the response you recieved good luck with your project regards turnpin

 

[REDSAW]

welcome to the forum

 

[Howsie]

Where are you based?

 

[shaky]

Hello and welcome I've just stated fitting the Mitsubishi air to water heat pumps on a scheme were there is no gas cracking bits of kits but make sure sized right and property is well insulated.