- Messages
- 8
Hi have a potterton performa 24 he hot water flow is very slow. Have changed plate heat exchanger and made no difference heating is fine any ideas?
Discuss Hi have a potterton performa 24he hot water flow is very slow. Have changed plate heat exchanger and made no difference any ideas? in the USA area at PlumbersForums.net
- Messages
- 34,369
- Solutions
- 2
What’s your flow rate into the boiler ?
A
Aquarius
Slow at all taps, or one particular outlet?
- Messages
- 8
Main cold water pressure is good
- Messages
- 8
Filter is clean
- Messages
- 8
Pressure is low on all hot taps
A
Aquarius
Stopcock fully open? As per @ShaunCorbs what’s your cold inlet flow rate?
- Messages
- 8
Not sure but it's got to be high maybe 15 litres per minute
- Messages
- 34,369
- Solutions
- 2
Maybe not have you got an external filling loop ?
Reply to Hi have a potterton performa 24he hot water flow is very slow. Have changed plate heat exchanger and made no difference any ideas? in the USA area at PlumbersForums.net
Similar plumbing topics
Afternoon.
I have an issue with no water flow from any of the hot taps in the house, I can't seem to find a solution to the issue.
System is a...
Hi Folks,
I have a challenge with a Main Eco Elite 30 Combi which is short cycling on the CH. Water works fine. As soon as you have call for...
I've got a heating boiler which heats up the water in a tank located in a cupboard upstairs and then from there I get hot water & hearing. I get...
- Mr Andrei
- Central Heating Forum
Hi I have a 38cxi the heating works but no hot water i have changed the internal parts on the diverter valve installed a new heat exchanger and...