Search the forum,

Discuss Help - desperately seeking box key spanner for oso immersion in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
W

windchimes

Hi

My immersion heater needs a new element and it is an oso one and they supplly the spanner but out of stock at the moment. I have rung all the plumbers merchants but to no avail. I need a 50mm facing 1.25 inch box key spanner for this job as my plumber doesnt have one.

Thanks
 
I have the box key your referring to, I got it from "william wilsons" plumbing merchants
 
if you are still looking you can get these box keys in "toolstation" for around £5
 
I have the box key your referring to, I got it from "william wilsons" plumbing merchants
hi , I called them up but they don't have the right size as the oso needs a 50mm and that seems to be unobtainable.
Thanks anyway.
 
Status
Not open for further replies.

Reply to Help - desperately seeking box key spanner for oso immersion in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
122
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
293
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
236
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
143
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
280
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock