heater for power flush

[plumbster3456]

is there some type of heater you can buy to heat up the cold water in the power flush machine.
I have a power flush myself but sometimes its not possible to use boiler as heat source.
I have been looking for some type of heater that could plug into the wall and then through the whole in power flush machine

 

[tamz]

Here

CombiHeat power flushing heater

or just stick in an old howdens 4 bolt

 

[dontknowitall]

I'm sure I posted on this thread last night ...

I suggested one of those "school" heaters used for coffee/tea. (Obviously after making yourself a brew.)

 

[plumbster3456]

Here

CombiHeat power flushing heater

or just stick in an old howdens 4 bolt

I dont have a kamco power flush machine so dont know if this is compatible with my machine.
I was thinking something more along the lines as an immersion type heater that could go through the whole on the powerflush machine

 

[plumbster3456]

I'm sure I posted on this thread last night ...

I suggested one of those "school" heaters used for coffee/tea. (Obviously after making yourself a brew.)

lol I actually thought you were joking when you posted that on the other thread

 

[dontknowitall]

LOL - I was thinking earlier today that it might be a helpful touch when replacing someone's hot water cylinder and they're going to be without hot water overnight.

 

[tamz]

The combimag will fit any powerflush machine. It has std 3/4" male connections.