Glowworm Micron 40ff fault finding

[Backboiler]

Why, when following the fault finding guide in the M/I's of a Micron 40FF does it suggest checking 6 LED's when the board appears to only have 2 LED's? I think the lights illuminate in conjunction with the ignition sequence.

​

 

[GrahamM]

Eh?
The MI's I have looked at show the faults relating to various sequences of the two lights.

 

[dave1]

Why, when following the fault finding guide in the M/I's of a Micron 40FF does it suggest checking 6 LED's when the board appears to only have 2 LED's? I think the lights illuminate in conjunction with the ignition sequence.

​

These are the 6 small led lights actually on the pcb. Normally not to bad to fault find these boilers, what's your one doing or not doing?

 

[dancinplumba]

please be careful what you post as this is an open forum

 

[Billy Bob Bob]

join the gsr only forum we dont want this sort of advice in the open forum