Search the forum,

Discuss G3 certified engineer required Fulham SW10 area in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Eyespy999

Plumbers Arms member
Plumber
Messages
148
Hi, this is a request for a family member who lives in SW10 Fulham Broadway area.

Unvented cylinder TPV has limescale deposits on the compression fitting suggesting it has been letting by for a while. Service and advice required from a trustworthy engineer.

pholto will be attached. I am G3 but hundreds of miles away. Any help appreciated guys.

regards
 
IMG_3317.jpg
 
Thanks for the opportunity.

If this job interests you please PM the op direct.
 
Status
Not open for further replies.

Reply to G3 certified engineer required Fulham SW10 area in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

R
Greetings, esteemed community members, I find myself in possession of a remote and highly inaccessible plot of land, devoid of any utilities. On...
Replies
4
Views
618
    • Like
I wanted to start a new more dedicated thread as I am on about 3 just now in one way or another trying to get up to speed with my problem. The...
Replies
9
Views
2K
Hi there, I hope you can help please! I wanted to check whether the following seems reasonable before I spend more £ calling a G3 engineer out...
Replies
19
Views
3K
Hi, I'm new to this forum so please excuse me if I've posted in the wrong forum or whatever. I would call myself a competent amateur plumber...
Replies
8
Views
3K
A domestic Gas Standard pre-payment Meter was exchanged for a Gas Smart Meter (SM) and then connected back to the pre-existing...
Replies
8
Views
12K
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock