Discuss Flueless gas fire min room size calculation, a little help please. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

TFGplumbing

Plumbers Arms member
Plumber
Gas Engineer
Messages
998
Okay I am servicing a Burley esteem 4221 (lpg) this week and apparently it requires a min room size of 30cu3. evidently I am going to want to check this as part of the service. How do I check/calculate this?

P.S yes I could go out to my van and get my gas book But I though Id ask here... and its raining =)

Thank you servicing.JPG
 
Last edited:
You don't need a gas book to work out a room volume.
Length x breadth x height

e.g.
4m x 3m x 2.4m = 28.8m³
 
You don't need a gas book to work out a room volume.
Length x breadth x height

e.g.
4m x 3m x 2.4m = 28.8m³

yah yah i know that hehe. whats the ''cu3'' unit that Burley state in the fires manual. ''it has to have 30cu3'' aparently
 
You don't need a gas book to work out a room volume.
Length x breadth x height

e.g.
4m x 3m x 2.4m = 28.8m³

Does this calculation account for the influence of an integral flux capacitor as well as adventitios wossname?
 
cu is normally used as cubic unit, but to use this you have to first define the volume of the unit. is there a key in the front or back of the manual?? clutching at straws though i think.

it could be cubic unicorns?? :)
 
There is obviously a typo. "cu" is cubic. But cubic what? As mentioned it will almost certainly be meters.
 
Status
Not open for further replies.

Reply to Flueless gas fire min room size calculation, a little help please. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

E
Hi all, Apologies if this has been covered elsewhere but I can't find an answer to my questions. I have a back boiler and gas fire which h has...
Replies
3
Views
963
So I bought my first flat recently (am in UK) and in a bit of a pickle as the bathroom has turned up lots of problems that weren't picked up by...
Replies
1
Views
744
I am looking for some basic advice please My house is on two floors, approx 240m2 and a spacious loft with good headroom and access. Glow Worm...
Replies
4
Views
1K
Hi all. I want to replace the rads in my front room and to get the right size I'm trying to calculate the BTUs but I'm having agro calculating so...
Replies
2
Views
2K
Hi there, thanks for your time to look at this record long post!! I work on the operational management side or a small building contracting firm...
Replies
9
Views
1K

Newest Plumbing Threads

Back
Top