Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Flue integrity failed I'd or at risk in the Gas Engineers Forum area at PlumbersForums.net

Messages
1
flue integrity test failed on a room sealed boiler however not effecting combustion and not leaking into room, would it still be I'd or can it be at risk.
 
Id

Unless it’s right by a road then a re test is required to check it’s nothing to do with the road pollution
 
I'm self employed so I'd just repair it.
If its failed on O2 on supply air then its usually just a seal (if not atmospheric).
I'd check fall on flue too.
If its minor and I can book it in within a few days then Its not a big deal
 

Reply to Flue integrity failed I'd or at risk in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
319
I have attached an image of the brass body within a tap. Having replaced a cartridge which has cured a leaking tap, I can see that there is a...
Replies
2
Views
355
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
321
  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was...
Replies
0
Views
245
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
314
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock