Currently reading:
Fga test caps

Discuss Fga test caps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

macka09

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,226
Hi guys.

Any of you have a routine when putting these back? I can't stop thinking that I've forgot to put it back.
 
Hi guys.

Any of you have a routine when putting these back? I can't stop thinking that I've forgot to put it back.

I Usually take the cap/plug out put it on top of the boiler, then put it back in when I take the probe out, then have a last check of everything before I leave
 
I take a pic when I put it back so I don't think I have forgot when driving home 4 hours later
 
Oh the mind games of gas engineering its the same with the test nipple, amount of times i have drove off had a panic moment gone back saying i left a screw driver in by the gas meter lol
 
Oh the mind games of gas engineering its the same with the test nipple, amount of times i have drove off had a panic moment gone back saying i left a screw driver in by the gas meter lol

Yep....its always the test nipple.
 
Oh the mind games of gas engineering its the same with the test nipple, amount of times i have drove off had a panic moment gone back saying i left a screw driver in by the gas meter lol

For me its when I leave my U Gauge attached come back to it and can't remember where I put the nipple, It's usually on top of the meter but I always miss it
 
just pop back and look for my spanner............................
 
Oh the mind games of gas engineering its the same with the test nipple, amount of times i have drove off had a panic moment gone back saying i left a screw driver in by the gas meter lol

A guy I know used to work for a firm who were doing a lot of gas meter swaps. At the end of the day back at the depot he used to drop an old test nipple screw into peoples pockets. Then when they got home and emptied their pockets they used to panic and drive back to all the jobs from that day! haha
 
Status
Not open for further replies.

Reply to Fga test caps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock