M
mazara01
how do I program a new ignition pcb on the above boiler?
Discuss ferroli optimax 25c in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to ferroli optimax 25c in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Ferroli optimax 25 OV
Pcb blew after turning on after pump replacement. Nothing on display blank.power on board ok. Fuse not blown? Hence Could...
- Locked
Hello, I have a ferroli falcon 2 boiler (yes it is pretty old). A few days ago the hot water started going hot and cold when running.
Monitoring...
Ferroli 32c he (combi)
So after having a 2 week holiday, we have come home to no hot water.
It just cycles on off every second.
Heating working...
Hi, I've got a ferroli 901 boiler, I initially thought the pcb was at fault so bought a new one and I'm having the same problem ( has been...
I have an ancient ferroli 901 optima that due to recent redundancy I am unable to replace , for a good while now there has been short cycling...
Newest Plumbing Threads
-
Cold water issues in the top bathroom
- Started by Apex84
- Replies: 1
-
-
How much would you pay for a universal flush valve that enables replacements in under 5 minutes?
- Started by Professor
- Replies: 8
-
Bossing shower waste into soil pipe vs. separate shower waste- Started by CitizenErased
- Replies: 3
-
UK Advice on waste water pump in first floor flat
- Started by kbqwert
- Replies: 3
-
AM18x1 femail to 1/2" hose connector.
- Started by Adaminspace
- Replies: 0
-
Off grid shower and toilet solution needed
- Started by TpXThinnr
- Replies: 5