Search the forum,

Discuss ferroli maxima 35c in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

rm1

tried to get a wiring loom for this boiler told by parts centre it is obsolete, boiler is under 10 years old are the manufacturers not meant to carry spares for the first 10 years?
 
Yeah the law states that spares must be available for a minimum period of 10 years.

Try a different supplier?
 
Yeah the law states that spares must be available for a minimum period of 10 years.

Try a different supplier?

What 'law'? has government sat in parliament discussing boiler spares and come up with a majority vote in favour of 10 yrs? lol .... These are Italians anyhoo's I doubt they give a fluff :)

I'd agree, try somewhere else, or advise on replacement!
 
Had to replace a 4 year old one if these as it had melted the combustion chamber....the silly sausage complained to ferroli and they then managed to sell him an optimax! !!!! I did try and warn him
....some people dont learn!!

Sent from my MB526 using Tapatalk
 
What 'law'? has government sat in parliament discussing boiler spares and come up with a majority vote in favour of 10 yrs? lol .... These are Italians anyhoo's I doubt they give a fluff :)

I'd agree, try somewhere else, or advise on replacement!

I thought that was the case, I was wrong. I've just looked in to it further and it seems that only 'British Gas Service Listed' boilers have to meet this requirement and it doesn't look like the Ferroli is one of them.
 
I thought that was the case, I was wrong. I've just looked in to it further and it seems that only 'British Gas Service Listed' boilers have to meet this requirement and it doesn't look like the Ferroli is one of them.

I said it tongue in cheak mate, hope i didn't offend! One of my niggles on the site is folk mentioning stuff being the 'law'! The 'laws' i've flaunted at times would have me committed for life if they were actually policed ...:lol:
 
I said it tongue in cheak mate, hope i didn't offend! One of my niggles on the site is folk mentioning stuff being the 'law'! The 'laws' i've flaunted at times would have me committed for life if they were actually policed ...:lol:

LOL, no :nonod: you didn't.

Its all good. I can see where your coming from. :smug:
 
Status
Not open for further replies.

Reply to ferroli maxima 35c in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
163
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
262
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
270
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
93
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock