Search the forum,

Discuss Fascia Paint? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

Marples

Can anyone advise me on some good fascia paints not too expensive which will last.
We have a job coming up and I have no idea what is the best to use.

Thanks in advance.
 
The customer wants to keep the wooden fascia they have so replacing it with upvc isn't an option, If it was up to me i would.
The wood is in good condition just a little stained but they just want it smartening up.
 
Last edited by a moderator:
Decent quality paint then, but its all in the preparation.
 
painted my facias with dulux 3 part sytem microporous exterior paint 10 years back, still going fine and 1/2 mile from the sea and fould weather. Johnsones on another window peeled off after 3 years, the difference is obvious in my mind.
 
Last edited by a moderator:
painted my facias with dulux 3 part sytem microporous exterior paint 10 years back, still going fine and 1/2 mile from the sea and fould weather. Johnsones on another window peeled off after 3 years, the difference is obvious in my mind.

Do you know the exact name of the products? can't seem to find anything along those lines.
 
Status
Not open for further replies.

Reply to Fascia Paint? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
253
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
421
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
234
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock