L
lame plumber
As stated, by doing it right such that courts aren't involved. Time to shut this down guys. Night Night:8:
Discuss electric shower problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Naw, a TSR.....toaster registered engineer.how do you prove competence in a court of law when cust frazzled ? by being a gsr ?
All showers must be fitted with 10mm twin and earth minimum, terminating at the consumer box with a separate RCD for safety.
yes oh messiah, am truly staggered by your knowledge of plumbing and electrics:smartass:As stated, by doing it right such that courts aren't involved. Time to shut this down guys. Night Night:8:
They will look at your install. It's either pass or fail.how do you prove competence in a court of law when cust frazzled ? by being a gsr ?
To take the load without overheating the cable. All showers of 8.5kw and above must be 10mm twin and earth minimum. If the cable run is a long one it should be increased to 12mm.
Yes that is what I said, it should be sized to suit the load and run, and increased if the run is a long one. But 10mm is now the minimum and any M.I I've read recently states this.You have got that one wrong.
It needs to be suitably sized to suit the load and how it is run.
A bit like saying a 24kw boiler needs an 22mm gas pipe. It doesn't necessarily but it does need a properly sized one.
Reply to electric shower problems in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.