Discuss E6 on a Avanta in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

dancinplumba

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
7,272
Got an Avanta, The MI's Say faulty control unit. Does anyone know if this the ignition coil or the PCB ?
 
Normally the ignition coil also good idea to service with kit new seal electrodes etc kit not cheap approx £95, ignition box think was about £30 +|-
 
I think the front insulation pad comes with the service kit now, hence the huge price increase (used to be around £35)
 
if its under warranty get the bits for free, heat team always get their parts wrong , last time i ended up with 10 burner seals, 2 heatex, numerous service kits all fm one phone call :)
 
if its under warranty get the bits for free, heat team always get their parts wrong , last time i ended up with 10 burner seals, 2 heatex, numerous service kits all fm one phone call :)
sadly its not, put new spark generator in
 
Status
Not open for further replies.

Reply to E6 on a Avanta in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

So a strange conundrum regarding water temp if anyone can help resolve, would be much appreciated. Ive tried to give as much info as possible to...
Replies
1
Views
199
This valve is fitted to the lower heating coil of the hot water cylinder Can anyone say what is the point of it I have been told its a...
Replies
1
Views
351
    • Like
Did anyone watch Britain's Got Talent last night? There was a Plumber on from Stockport called Darren who bottled it last year but did his...
Replies
2
Views
380
My Zanussi gas oven has 4 gas rings and 2 gas ovens (the smaller top oven has a grill). (Model ZCG664GNC). There are 6 gas knobs (gas taps you...
Replies
3
Views
512
D
I have a Vaillant Turbomax with an F29 fault. When there is a demand for hot water the gas ignites initially, and the water is heated. However the...
Replies
7
Views
731
Deleted member 120897
D
Back
Top