Search the forum,

Dunsley Decommission

Post new thread

Discuss Dunsley Decommission in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
V

verdigrey

Plumbers Arms member
Plumber
Messages
146
Hello Everyone , I have a customer who wants me to disconnect a Dunsley back boiler and install an oil boiler plus extra rads . Once I have drained the system and disconnected the Dunsley can I just dril a few holes in it and leave it in situ ? Will that be safe when they use the open fire again ? thanks .
 
verdigrey said:
Hello Everyone , I have a customer who wants me to disconnect a Dunsley back boiler and install an oil boiler plus extra rads . Once I have drained the system and disconnected the Dunsley can I just dril a few holes in it and leave it in situ ? Will that be safe when they use the open fire again ? thanks .
Click to expand...
as far as i know thats fine plenty of holes is fine
 
Status
Not open for further replies.

Reply to Dunsley Decommission in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
  • Question
Could the BAXI commercial boiler parts/flue melt ?
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
2
Views
82
oz-plumber
O
Lou
  • Article
Plumber Who Worked Illegally Gets Suspended Sentence
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
212
Lou
Lou
P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
224
ShaunCorbs
ShaunCorbs
SnosRap75
Boiler losing pressure only on central heating
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no issue, however, when running the heating the pressure drops. Im looking for some ideas on what could be causing this. I have no sign of pipe leaks...
Replies
6
Views
227
SnosRap75
SnosRap75
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
177
Lou
Lou
Creating content since 2001. Untold Media.

Newest Plumbing Threads

UK Tiling Forum
Electrical News
Tiling Tools
Electrician Talk Forum
Tiling Forum UK
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock