Search the forum,

Dunsley Decommission

Discuss Dunsley Decommission in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
V

verdigrey

Plumbers Arms member
Plumber
Messages
146
Hello Everyone , I have a customer who wants me to disconnect a Dunsley back boiler and install an oil boiler plus extra rads . Once I have drained the system and disconnected the Dunsley can I just dril a few holes in it and leave it in situ ? Will that be safe when they use the open fire again ? thanks .
 
verdigrey said:
Hello Everyone , I have a customer who wants me to disconnect a Dunsley back boiler and install an oil boiler plus extra rads . Once I have drained the system and disconnected the Dunsley can I just dril a few holes in it and leave it in situ ? Will that be safe when they use the open fire again ? thanks .
Click to expand...
as far as i know thats fine plenty of holes is fine
 
Status
Not open for further replies.

Reply to Dunsley Decommission in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
192
ShaunCorbs
ShaunCorbs
D
Extending outdoor tap and drain
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
213
DIwhYdidIstartThis
D
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
129
Stigster
Stigster
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
215
DIwhYdidIstartThis
D
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
173
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock