Search the forum,

Drainage testing with air? Dropping

Post new thread

Discuss Drainage testing with air? Dropping in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

M

macka09

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,226
Hi folks.

What is the best way to trace a drop on a 4” stack test? I’m only using the little 100mm u gauge and bungs but can’t find nothing with ldf? Cheers
 

Reply to Drainage testing with air? Dropping in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

P
LCS to new water mains
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
193
ShaunCorbs
ShaunCorbs
sammie81116
Sewer pipe problems not sure about it
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
498
Chuck
C
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Chuck
C
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
232
DIwhYdidIstartThis
D
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
195
mutley racers
M
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Plumbing Advice
UK Tiling Forum
DIY Advice
Tilers' Talk
Electrical Advice | Electricians Blog
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock