Search the forum,

Discuss dont smoke in you van :) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
L

lame plumber

[DLMURL]https://www.youtube.com/watch?v=b-Z9M7MU_LM[/DLMURL]
 
Last edited by a moderator:
That's the trouble with Rothenbergers, unless you lock the button or turn the gas off, they can still let gas through in the tool box!!!!:smoking:
 
[DLMURL]https://www.youtube.com/watch?v=m5j534GFpVE[/DLMURL]

Stumbled onto this one on the same link, what the hell has this guy eaten??
 
Last edited by a moderator:
[DLMURL]https://www.youtube.com/watch?v=m5j534GFpVE[/DLMURL]

Stumbled onto this one on the same link, what the hell has this guy eaten??

really................................................................................
 
Last edited by a moderator:
That's the trouble with Rothenbergers, unless you lock the button or turn the gas off, they can still let gas through in the tool box!!!!:smoking:

I always would take the gun off and empty the gun and lock it off ...
 
I believe it is an lpg fuelled van, nothing to do with heat guns :) but a full leaky cyl could probably ruin your day, just stunned that the numpty couldnt smell anything, unless it was just sitting round his feet being heavier than air!
 
[video=youtube;5-nOPvXiIWQ]https://www.youtube.com/watch?v=5-nOPvXiIWQ[/video]

skip to 30sec
 
Last edited:
Status
Not open for further replies.

Reply to dont smoke in you van :) in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

    • Like
Did anyone watch Britain's Got Talent last night? There was a Plumber on from Stockport called Darren who bottled it last year but did his audition last night.. He was a stand up comedian and he got off to a rocky start but by the end everyone was loving him! Does anyone know him? Is he a...
Replies
2
Views
262
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
224
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
226
I have done pressure test for 2" high pressure pipe line by closing the pipe with rubber plugs at the ends. It was 3 bar and I kept it for 24 hours. Its shows a pressure drop of 0.5 bar. The pipe line is fully exposed and I couldn't find any leak on them. What might be the problem. If somebody...
Replies
6
Views
243
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
306
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock