Distance between copper hot and cold water pipes and electric board

[Mgrant]

Hi is there a set distance copper hot and cold water pipes need to be from the main electric (fuse) board/ consumer unit in a domestic property?

 

[plumber0808]

As far as practically possible.

i don't think there is any regulation covering this.

 

[AWheating]

common sense is the regulation you must follow.

 

[Resolute]

No regulation, however as far as possible is best. I'd also avoid joints and if they have to be done then I'd solder.

Also make sure they are all bonded!

 

[Mgrant]

I'm needing to run hot and cold water pipes in copper about 12 inches from the fuse board running parallel up past it. Not over it. Sound ok?

 

[AWheating]

yes..

 

[PlumbBobBob]

you should be fine with that distance. as said get them bonded.

 

[Mgrant]

earth bonded?

 

[PlumbBobBob]

yes earth bonded

 

[AWheating]

stick em inside a boxing.