Search the forum,

Discuss Cscs course in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

P J F PLUMBING

Hi guys is it easy ?? Doing it tommorrow
 
If you know the pecking order of a site, the colour and purpose of different fire extinguishers, how to tie a shoe lace and and can spell your name you'll be fine
 
I ordered the book it never came until after I had done the test so I was bricking it thinking I was going to fail. I did the tutorial, test and I was done in about 15 minutes. Most of it is common sense so you should be fine.
 
Yeh I did mine cold....... Drastic fail 10 years ago. Wasn't the site operatives in was but more nonsense.
 
Another way for somebody to print money. Do it and your are what it says on the card!!
 
Any one got a stupid guide I'm doing it in the morning not sure what to expect
 
Which cscs you going for? There seem to be loads, is the gas one gold?? Or is that a Jib card? As you can tell I aint done one.
 
another scheeme to fill the boots of training centers
your down a hole in the ground and a lorry is backing towards you should you
A. MONITOR THE LEVELS OF CO
B.INFORM YOUR SUPERVISOR
C. GET THE FECK OUT
Actually the correct answer is b as you need a supervisor to oversee the way you leave the hole
 
If you fail it you shouldn't be let out of the house on your own!!! As said, a license to print money
 
Now you've got you white and green get on site and get some yellow cards !
 
Status
Not open for further replies.

Reply to Cscs course in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
236
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
228
  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
79
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock