Search the forum,

combo valave identity

Post new thread

Discuss combo valave identity in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
quality

quality

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,294
Can anyone identify the attached reliance valve model TIA

IMG_0117.JPG


IMG_0118.JPG
 
Reliance water controls
 
I dont know if its anygood pal , but I am pretty sure I have a brand new one , but not home at minute to check
 
thanks for advice it needs a new prv also, I will call ad tomorrow
 
Status
Not open for further replies.

Reply to combo valave identity in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
150
Stigster
Stigster
C
How to identify dripping tap.
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
372
Timmy D
T
B
What is correct toilet supply line
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
198
ShaunCorbs
ShaunCorbs
C
Mixer bar fitting solutions?
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
216
SimonG
SimonG
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
280
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

UK Tiling Forum
Plumbing Advice
Electrician Talk Forum
Tile Talk
UK Tiling Forums
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock