Search the forum,

Discuss Client wants aircon any advice ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

64degrees

Gas Engineer
Messages
48
Hi all, been asked by a client to install aircon in a single room in their house. There’s a loft space above and ideally the unit would be wall mounted externally and ducted into the loft, with a ceiling grill in the room.
Thinking about getting a Daikin/Mitsi Rep out to spec it, keen to hear what you guys have done in a similar situation. Jobs in Oxfordshire if anyone local wants to quote.
Have posted in renewables as well, sorry if in wrong thread
 
Hi Shaun - you mean refrigerant gas? No mate, that’s why I’m posting the job, and asking for advice. And anyone local who wants to quote.

Not sure the client will wait till I’ve done the course, although it’s only March and after last summer they probably won’t need it this year
 
Using a ducted unit in the loft and grills in ceiling is substantially more expensive with little upside. If its a bedroom a small wall mounted unit would work best and be much cheaper, you can still run all the pipework through the loft and drop down from the eaves to outdoor unit.
I have fitted all split types and would go wall mounted every time, unless there is room for a 4 way cassette you see in commercial property.
Also not close enough to quote....
 
Using a ducted unit in the loft and grills in ceiling is substantially more expensive with little upside. If its a bedroom a small wall mounted unit would work best and be much cheaper, you can still run all the pipework through the loft and drop down from the eaves to outdoor unit.
I have fitted all split types and would go wall mounted every time, unless there is room for a 4 way cassette you see in commercial property.
Also not close enough to quote..
Thanks for the advice, any preference as to manufacturer?
 

Reply to Client wants aircon any advice ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
195
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
118
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock