Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss can this be done in a pressurised heating system in the Central Heating Forum area at PlumbersForums.net

Messages
60
Hi all ,
on a pressurised heating system is it ok to take a flow and return up into the loft and down again to install new radiator also would it be prudent to put AAV at the high point , thanx in advance .
Howy
 
It is OK so long as it can be vented. It's not the best idea of course but sometimes these things are unavoidable.
I wouldn't use an AAV in your home personally. I find that they are prone to leak. In theory, once it is full, it shouldn't need bleeding so a manual one will be adequate.

Can the pipe work not be run another way?
 
It is OK so long as it can be vented. It's not the best idea of course but sometimes these things are unavoidable.
I wouldn't use an AAV in your home personally. I find that they are prone to leak. In theory, once it is full, it shouldn't need bleeding so a manual one will be adequate.

Can the pipe work not be run another way?
Thankyou , yes I agree but I have a blockage issue in a newish house and it seems the only solution , I have explored other ideas
I appreciate your input I shall put manual valves in .
 
Thankyou , yes I agree but I have a blockage issue in a newish house and it seems the only solution , I have explored other ideas
I appreciate your input I shall put manual valves in .
Manual air vents, yes. If you mean manual valves to pipework for isolation then use gate valves in my opinion.
 

Reply to can this be done in a pressurised heating system in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

Hi All, I hope you are doing well. I have old un-pressurised heating system and I need to top up the water but I cannot locate the bloody...
Replies
6
Views
433
Hello, I live in a two floor semi with a gravity fed conventional gas fired boiler (Potterton Kingfisher MF). The boiler is fed cold water from...
Replies
0
Views
514
Hi All, Hope somebody can help :) I have a vented HW system with a pressurised Ch system but got bit of a annoying issue, when the hot water...
Replies
3
Views
491
Hi, I’m replacing my old Honeywell Smartfit system on a oil fired gravity-fed system in a bungalow. I’ve read conflicting advice on gravity fed...
Replies
2
Views
728
T
Hi We urgently need to get our h/w cylinder replaced because it's leaking. Our current system is oil boiler feeding underfloor downstairs...
Replies
2
Views
403
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock