British Gas phone interview

[glasgowplumber]

First post on here, don't know if this is the correct place to put the thread or not.


I've got a phone interview with British Gas for Technical Installation Gas Engineer. Anybody had one recently? What sort of stuff do they ask? I've not had a job interview in about 5 or 6 years so i'm not sure what to expect.

Any help appreciated

 

[AWheating]

The answer to all the questions is.......... You need a power flush or we won't fix your boiler.

 

[Atouchofgas]

Or some parts are obsolete on your 3 year old boiler here's a quote for a new one

 

[jtsplumbing]

Or some parts are obsolete on your 3 year old boiler here's a quote for a new one

Over 3 years would be NCS will have to cancel your insurance, have arranged for sales man to call

 

[glasgowplumber]

:lol:



Any real answers would be good :teeth_smile:

 

[jtsplumbing]

Phone call is first stage, I think most people get through this, if they are using the same format, then you will have to do a online test, after that attend a induction interview where you have to show your knowledge of systems, it used to take several weeks from the 1st phone call. B4 you here from them

 

[glasgowplumber]

Phone call is first stage, I think most people get through this, if they are using the same format, then you will have to do a online test, after that attend a induction interview where you have to show your knowledge of systems, it used to take several weeks from the 1st phone call. B4 you here from them

Aye everybody I've spoke to says it takes a while. I done an online application along with my CV, the next day they got back and said I had a phone interview. I'd assume there's some sort of gas test thrown in along the lines to double check you're competent as well

 

[Bhoydavid]

This is the image they said they will ask me questions on. Does anyone know what questions they ask at all? Or anything glaringly wrong with this picture?

 

[GasmanxxxR1]

cold feed is in the wrong place. needs an abv.

 

[Bhoydavid]

cold feed is in the wrong place. needs an abv.

Cold feed to the boiler? Where should it be located? Seeing these drawings just makes me flap haha

 

[GasmanxxxR1]

before the pump

 

[GasmanxxxR1]

If they get picky it needs a balancing valve on the hw return and some docs at the lowest points

 

[mountainman]

Cylinder would benefit from an open vent.

 

[jtsplumbing]

Look a position of cylinder return !

 

[chris watkins]

This is the image they said they will ask me questions on. Does anyone know what questions they ask at all? Or anything glaringly wrong with this picture?

View attachment 18849

System pipe work is under negative pressure with neutral point after circulator.
Danger of draw-down on the open vent when circulator starts, depending on the system head.
Auto bypass required before zone valves if boiler has pump overrun fitted.
How are the red & blue pipes connected at the cylinder ?
What are the two things marked with an "M" & what do they do?
Why should the righthand cistern have a higher water level than the one on the left ?
What size pipes should be used & where ?

This is fun we could / have recked BG's entrance exam. Any more anyone can think of?