B
bazza5070
Hi, I have a 2.5 year old Baxi Solo 24 HE, had no problems while it was under the 2 year warranty but then it kept locking out. Took off the Combustion Chamber door and discovered the seals were totally shot, replaced these thinking that was the problem. Now it fires up and doesnt lock out but after about a minute the pilot light flickers and gets quite noisy, then after another minute or so there is a loud bang and the pilot light goes out. The pump appears to be ok and have topped up the water levels. Any advice I can pass on to my repair man as he appears to be at a bit of a loss, he has rang the techies at Baxi but they have not been much help at all. I am not in the financial position for him to be systematically replacing parts. Any thoughts would be much appreciated as I am a single parent with a disabled kid and we are slowly freezing and forgetting what being warm is!!!!