Search the forum,

Discuss Baxi Neta-tec Plus 33 GA . in the Plumbing Jobs | The Job-board area at PlumbersForums.net

quality

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,294
Hi folks I am not a Baxi type so not familiar with this boiler. Customer has got heating but no hot water. The display does not register that there is DHW demand. When heating is turn on the diverter operates and the boiler fires as it should and when turned of the diverter returns back to DHW position. Is there any advice you offer TIA.
Boiler is 5 years old
 

Reply to Baxi Neta-tec Plus 33 GA . in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
273
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
279
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
361
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
190
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
310
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock