T
trigger25
I've just fitted a new slotted basin waste and aligned the slot towards the overflow hole in the sink. The overflowing water doesn't go out fast enough and could spill over if the tap is left on too long.
The basin is a Bathstore one and when looking at it before fitting the waste I noticed some slots in the waste hole (might have been on the sides 90 degrees to the hole in sink) but I can't remember where they actually were.
Can anyone who has seen one of these sinks advise me how the basin waste should be aligned. I don't particulary want to remove the waste just to see.
Thanks
Trigger
The basin is a Bathstore one and when looking at it before fitting the waste I noticed some slots in the waste hole (might have been on the sides 90 degrees to the hole in sink) but I can't remember where they actually were.
Can anyone who has seen one of these sinks advise me how the basin waste should be aligned. I don't particulary want to remove the waste just to see.
Thanks
Trigger