Search the forum,

Discuss Bathroom Planning. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

SimonG

Esteemed
Plumber
Subscribed
Messages
21,055
Anybody use any software for planning out bathrooms to give the cust an idea of what the finished article will be like?
 
I just used the ideal standard one, bit of a pain but give a good idea of layout
 
Ive popped into b and q before now. Asked for a quote on similar stuff to what custard wants and they knock up a few cad drawings for you. Needless to say dont actually buy anything from them......
 
My local independant merchant does it all for me have the cad program or if customer goes in themselves it's right there in front of them on a tv behind the girls heads
 
Ive used ideal standard too not really too good on computer (me that is) interest to see if there is an easier way though..brum
 
Status
Not open for further replies.

Reply to Bathroom Planning. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
362
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
6
Views
243
Just started gound work on self build bungalow and wondering best way to do below ground soil pipes. For toilet I was going to go straight down through slab and out through deadwork into a manhole. I will work out falls from manhole and set the height of the waste water system as required. For...
Replies
2
Views
128
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
261
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
153
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock