Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Automatic air vent screw in the USA area at PlumbersForums.net

Messages
10
5DE43806-F4F9-4944-94A0-A2C8C9BEAFF6.jpeg
Just a quick question the black screw on the vent is it suppose to be screwed tight or undone under normal operation
 
Open for filling / draining

normal operation closed
 

Reply to Automatic air vent screw in the USA area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
257
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
254
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason...
Replies
3
Views
328
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
316
Can anyone recommend a decent multi meter, preferably under a 100 pounds. It's for checking boiler components so I don't need a top spec one...
Replies
7
Views
299
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock