C
chris1943
Hi Guys
New to the forum so please bear with me. Seeking expert advice on how to proceed.
I moved into my current property 7 months ago and need to renovate the central heating system and DHW before next winter. Property is a late 1800's barn conversion currently running on an old inefficient heating oil boiler. No gas at all in village.
House will receive a considerable investment in insulation to loft, walls etc which have become very apparent during the cold spell last winter.
I am thinking about installing ASHP as a main provider of heating and hot water backed up by electric immersion. Wet underfloor heating is also an option I would like installed which would cover about 30-40% of ground floor.
What I would also like to do is to back this up with a log burner/ multi fuel stove with back bolier. The logistics of getting the plumbing there can be overcome but I would like to ask if anyone has experience of such an installation and is it a viable combination. I have read other posts regarding cylinders exploding and obviously want to get this right first time.
Very confused as conflicting info on main items needed. ie what type of cylinder would I need? Direct or indirect, Vented or unvented???
I have read that a dunsly baker neutralizer is required but not sure if this is needed or not and what it exactly does.
Any help would be gratefully recieved
New to the forum so please bear with me. Seeking expert advice on how to proceed.
I moved into my current property 7 months ago and need to renovate the central heating system and DHW before next winter. Property is a late 1800's barn conversion currently running on an old inefficient heating oil boiler. No gas at all in village.
House will receive a considerable investment in insulation to loft, walls etc which have become very apparent during the cold spell last winter.
I am thinking about installing ASHP as a main provider of heating and hot water backed up by electric immersion. Wet underfloor heating is also an option I would like installed which would cover about 30-40% of ground floor.
What I would also like to do is to back this up with a log burner/ multi fuel stove with back bolier. The logistics of getting the plumbing there can be overcome but I would like to ask if anyone has experience of such an installation and is it a viable combination. I have read other posts regarding cylinders exploding and obviously want to get this right first time.
Very confused as conflicting info on main items needed. ie what type of cylinder would I need? Direct or indirect, Vented or unvented???
I have read that a dunsly baker neutralizer is required but not sure if this is needed or not and what it exactly does.
Any help would be gratefully recieved