Search the forum,

anyone do commercial gas in or near leeds

Post new thread

Discuss anyone do commercial gas in or near leeds in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

phil7677

hi i have a friend who owns a couple of nightclubs in leeds and harrogate and would like a number for his next gas test as all the lads i know only do domestic.please pm me with any numbers/ names. thanks Phil
 
defeats the reason to promote the opertunity to the lads on here then wont it quality.
 
i would rather someone off here than the gas register as an electrician i know if i went on the nic website it would be more like a lottery as to how and who i could get. would rather the work went to one of the guys/girls on here :)
 
Status
Not open for further replies.

Reply to anyone do commercial gas in or near leeds in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Lou
  • Article
Plumber Who Worked Illegally Gets Suspended Sentence
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
204
Lou
Lou
P
  • Question
Could the BAXI commercial boiler parts/flue melt ?
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
2
Views
61
oz-plumber
O
F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
504
FozzieBear
F
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
216
dreikher
dreikher
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
293
exedon2
exedon2
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Advice Live
Tile Forum
Tile Advice
TilersForums.co.uk | UK Tiling Forum - Est 2006
Tilers Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock