Discuss Any ideas for a fix in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
A

assegayer

20161119_174239.jpg

I have a leak coming from two pipes that were done by a so called plumber now its causing problems with the neighbours could anyone suggest to me a part to fix it. I was thinking of some sort of adapter that i could fit on. If you able to tell me the size of the pipes anr adapter or whatever solution that would great thanks.Pic attached above

Thanks in advance
 
Has that back to wall pan been cut ? Lol and a bent pan connector should sort you out

but not an easy job

might be best to find a different plumber
 
I suspect the white pipe is a bent (90degree) pan connector which is too short.
The end is probably only just in the soil pipe, it should have a rubber seal on it, like the below;

http://www.toolstation.com/shop/p37429


Looks like the grey goes under the bath?

If it's into a pushfit socket it may be possible to pull it out and fit a slightly longer piece and a the same time fit a seal onto the pan connector.

Otherwise it's the WC pan out and a longer tailed 90 degree pan connector.
Or an extension, but will still need another seal for the existing pan connector;

http://www.mcalpineplumbing.com/wc-...nsion.html?id=82&wc_connector_type=267&cat=82

If the pan has been cut, it's strange that whoever did it had the skill to do that yet not the skill to make the connection watertight.
 
Last edited:
I suspect the white pipe is a bent (90degree) pan connector which is too short.
The end is probably only just in the soil pipe, it should have a rubber seal on it, like the below;

http://www.toolstation.com/shop/p37429


Looks like the grey goes under the bath?

If it's into a pushfit socket it may be possible to pull it out and fit a slightly longer piece and a the same time fit a seal onto the pan connector.

Otherwise it's the WC pan out and a longer tailed 90 degree pan connector.
Or an extension, but will still need another seal for the existing pan connector;

http://www.mcalpineplumbing.com/wc-...nsion.html?id=82&wc_connector_type=267&cat=82

If the pan has been cut, it's strange that whoever did it had the skill to do that yet not the skill to make the connection watertight.

Thank you for the in depth explanation really appreciated. What size do you reckon the grey pipe is out of curiosity?
 
JOB DONE!!!! thanks all for help turned out pipe was to short and the seal was ****. Extended it and added new seal.



20161120_141914.jpg
 
Status
Not open for further replies.

Reply to Any ideas for a fix in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could...
Replies
0
Views
274
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
224
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
464
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
322
Back
Top