Search the forum,

Any help with a Mira Elite QT 9.8kw

Post new thread

Discuss Any help with a Mira Elite QT 9.8kw in the USA area at PlumbersForums.net

P

paulh18

Messages
2
Hi I am looking for info regarding changing parts on a Mira elite qt. it is running lukewarm when selected on high setting on full heat and when I turn back to cold , it stays at same lukewarm temperature. On eco and low settings it is cold no matter where I set the temp dial. Any advice appreciated
 

Reply to Any help with a Mira Elite QT 9.8kw in the USA area at PlumbersForums.net

Similar plumbing topics

F
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
472
FozzieBear
F
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tiling Forum UK
BS 5389 Tiling Standards
Tiling Forum
Plumbing Advice
Tiling Forum
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock