Search the forum,

Advertising on plumbers forums

Post new thread

Discuss Advertising on plumbers forums in the USA area at PlumbersForums.net

N

Nick Cox

Gas Engineer
Messages
29
Since the plumbers forums page has changed its layout all I seem to get is adverts, adverts, adverts. Is there a option to not have these in the settings as i am getting sick of them. The forum just is not as good as it was before all the advertising. Any help would be appreciated.
 
Nick Cox said:
Since the plumbers forums page has changed its layout all I seem to get is adverts, adverts, adverts. Is there a option to not have these in the settings as i am getting sick of them. The forum just is not as good as it was before all the advertising. Any help would be appreciated.
Click to expand...
The advertising funds the operation of PF and I know some advertisers outside of PF and they report the responses and business generated via PF to be positive. Centralheatking
 
Nick Cox said:
Well in my opinion its a worse forum now, more difficult to navigate around the site as all you keep getting are pop up adverts for sunday plumbers and other junk advertising. Not impressed at all.
Click to expand...

If a “free” service paid for by adverts, as as the internet gets more active, rates for advertising go down , so more adverts are needed.

Maybe you should aSk Dan if you can “pay” for an ad free service ....
 

Reply to Advertising on plumbers forums in the USA area at PlumbersForums.net

Similar plumbing topics

P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
323
Chuck
C
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
118
Lou
Lou
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
244
exedon2
exedon2
C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
277
John.g
J
ian.
UK Auto balance trv and Ideal Vogue boiler
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
143
John.g
J
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock