Search the forum,

Discuss 3 Port Diverter Valve Actuator, Alternatives in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
15
Hi

I have a duff Honeywell 3 Port Diverter Valve Actuator V4073A, my mate has a new Honeywell V4043, would anyone know if they are interchangable, looked online but can't seem to find that info .
He also has a Altech ALTHC041 !.
cheers
Stan
 
V4043 is a 2 port, V4073 is a mid position 3 port.
I think the Altech is a thermostat - how does that relate?
Hi
Thanks for your reply, yes got that one wrong, the A4043 is indeed a 2 port, the Altech ALTHC041 is def a 3 portas per pic attached, I am really wanting a sustitute for my Honeywell A4073 .
thanks again for your reply.

cheers
Stan
 

Attachments

  • Altec ALTHC041.jpg
    Altec ALTHC041.jpg
    161.8 KB · Views: 11
etc.
 

Reply to 3 Port Diverter Valve Actuator, Alternatives in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
274
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
184
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic nut about the same size as the one going into the cistern but has a different thread. Attached is a photo. Can you advise. Thanks.
Replies
2
Views
183
Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
193
Hi, I have an old steel water mains pipe (approx 45mm) that I need to connect to a new pehd water mains (25mm). I can't get at it to create a new thread so what's the best way of connecting the two? Cheers, Peter
Replies
2
Views
193
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock