Discuss 110mm Solvent weld & push fit Pipe the same? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Can't use which underground, Shaun? I assume you mean solvent can't be used underground on the grounds that Supersleve is connected with a kind of pushfit, so if it's okay for clay, it's probably also okay for plastic?
ABS is much better than PVC for brittle fracture at low temp. That's why PVC is verboten for compressed air.Almost all 110mm above ground can be glued and pushfit as its a type of upvc, abs which alot of small bore waste pipe is made from can't be used outside as its not uv resistant. Makes you wonder why almost all brands use abs over pvc. You can get pvc waste if you look for it, hunter is one. Toolstations waste is also pvc but slightly hit and miss with other brands fittings.
Pvcis also better for higher temps.
Reply to 110mm Solvent weld & push fit Pipe the same? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.