- Thread starter Mossop
- Start date
- Replies 2
- Views 2K
- clips oil pipe pipe clips soil soil pipe solvent solvent weld weld
Discuss 110 mm soil pipe clips: solvent weld and push-fit in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
- Messages
- 6,157
Should be ok bud push fit and solvent weld is the same 110mm for soil pipe . cheers kop
- Messages
- 58
They will both be fine
- Status
Reply to 110 mm soil pipe clips: solvent weld and push-fit in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic...
Just started gound work on self build bungalow and wondering best way to do below ground soil pipes.
For toilet I was going to go straight down...
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
I have done pressure test for 2" high pressure pipe line by closing the pipe with rubber plugs at the ends. It was 3 bar and I kept it for 24...
Pipes for thermostat shower have been fitted at different heights. Any way of rectifying without ripping all tiles. So for clarity 15mm pipes...
- Delforkids
- Bathrooms, Showers and Wetrooms
Creating content since 2001. Untold Media.