Search the forum,

temp

A temp track is an existing piece of music or audio which is used during the editing phase of television and film production, serving as a guideline for the tempo, mood or atmosphere the director is looking for in a scene. It is also referred to as scratch music, temp score or temp music.The track is usually replaced before release by an original soundtrack composed specifically for the film. While some feel that having to follow a temp track can be limiting for a composer, it can be a useful tool in finding the right style of music for a particular scene and can be a time-saver for both the composer and director.

View More On Wikipedia.org
Recent contents Top users
  1. D

    Frost protection valve, detect air or water temp?

    Hi, Short version: Do frost protection valves trigger when the water in the pipe gets to threshold, or when the air temp drops? Long version: I'd rather use frost protection + anti-freeze cycle on my mitsubishi ecodan heat pump. The warranty is apparently fine with that combination, and it...
  2. M

    Why is Rad. Feed not as Hot as Flow Temp I've Set?

    Why is the radiator feed approx. 24degC just beyond/out of the Vaillant gas boiler (and also at the first radiator), when I've set the flow temp to 53degC? With boiler firing, the 53deg setting is always flashing on and off on the display - does this mean it never actually gets to 53? Thanks!
  3. B

    Thermostatic valves dont adjust the temp

    the majority of my radiators have thermostatic valves. Some of these work fine but some of them dont let you adjust the temp. ie. Setting one or setting 5 makes no difference - the radiator is blazing hot. For small bedrooms this is pain cos the room just heats up too much. we first...
  4. B

    correct pressure and dhw temp query

    Hi everyone just checking if this is right regarding water pressure and combi boiler pressure: Do hot and cold water always vary in pressure such as the following? Cold water from tap filled 1 litre jug in 2 seconds Hot water from tap filled 1 litre jug in 5 seconds Gas combi boiler pressure...
  5. T

    Worcester boiler CH temp issue?

    Experiencing an issue with a Worcester Greenstar 21i conventional boiler if anyone could help! I have previously installed a Tado smart controls system and is all working correctly with my 3 zone s plan system (CH x2, & HW). Boiler fires from the LR (signal) when the Tado calls for heat but...
  6. S

    Incorrect flow temp reading

    When there is no demand for heat and the system is "cold", the flow temperature displayed on the front of my WB boiler is still reading 41. The flow pipe feels cold to the touch, definitely not 41deg... Have I misinterpreted what this display is actually telling me?
  7. G

    WB Greenstar 8000 Range Rating and Flow Temp

    Hi all, I've had a WB 8000 35kw boiler installed today and was searching through some websites which talked about range rating your boiler and/or turning down the flow temperature to save on cost. I spoke to the engineer that installed it and he advised against rage rating saying that having 17...
  8. P

    How to set Danfoss TP5000 temp upper limit

    I have recently moved into a house with a Danfoss TP5000 remote boiler control panel. It seems to be working just fine other than I can only go up to a max temp of 16. The manual says there is a temperature upper limit setting but this is behind the installer advanced settings. The manual...
  9. B

    2 Zone Wet UFH System room temp low.

    Hi, I am using mu UFH for the first time and it doesn’t seems to get the whole floor warm enough let alone the room. (Intalled May 2022). First use this week. It is installed as per manufacturer’s details but seems to have to much temperature drop across the loop approx 25degc. Flow rate...
  10. C

    intergas OV boiler convert to outside temp compensated

    i currently have an intergas boiler on an OV S plan setup. i want to add the intergas outside air temp sensor and cylinder temp sensor and then wire to suit the current 2 valve setup. any wiring plans or guides please.
  11. D

    UFH normal water temp- aquarea

    Hi there. I am firing up the heating for the winter, zone by zone to test all is working and temp seems to be low. It’s an aquarea air to water system. It has heated our hot water no probs but it seems that the UFH aspect is running low ((or maybe it isn’t and I’m just not up to speed on...
    • Deleted member 113144
    • Thread
    • panasonic temp ufh water
    • Replies: 1
    • Forum: The Welcome Wagon :)
  12. P

    Oil Boiler water only tepid

    I have an oil boiler for the central heating. Some time ago it stopped working, and as it was during the summer I stupidly left it for quite a few weeks to try to get it fixed. It was eventually fixed and it seems the cause was a faulty photocell. Although the radiators heat up to hot, Ive...
  13. O

    Heatmiser slimline temp accuracy

    I have Heatmiser slimline thermostats installed in most rooms which have water uhf zones. They work fine but I’ve always thought the current temperature reading was a bit off. I confirmed this today by placing a few internal room thermometers in various places and it appears the Heatmisers are...
  14. J

    Grohe Shower runs cold from very high temp start

    Hi, Grohe shower Grotherm 1000 smart starts very high temp, then runs cold (28C) in 2 mins Changed thermostatic cartridge for a new one Exactly the same problem? Inlet temp 54 C Inlet pressure Hot 3.5 Bar Inlet pressure Cold 3.5 Bar Any advice appreciated Jason
  15. S

    Unvented Cylinder set up via gas system boiler and time clock

    Hi I wanted some steer from he forum for my set up. 2 storey house now extended on ground and a loft conversion. New plumbing install as of 18months. Worcester bosch 8000 life sysem boiler via natural gas. Time clock with HW / CH split, 7 day digital. 250litre Gledhill Select Indirect...
  16. gavdtra

    Thermostat on burner low but temp indivator much higher

    This thermoastat is much higher than the dial says. Correct.me if I'm wring but that doesn't seem right... It's been like that for days so it's not like I've just turned it down...
    • gavdtra
    • Thread
    • america burner higher temp thermostat usa
    • Replies: 4
    • Forum: USA
  17. R

    RINNAI E110CN Low Output Temp

    Hi. Couldn't find this anywhere. My Rinnai e110CN intermittently and now permanently acting like it's 40F outside. It seems to be stuck in efficient mode with water temp at 115-120F instead of 165F. It's about 8F outside. The result is temp dropping in house. It did this a few times and it...
  18. B

    UFH water temp too high

    Evening all, I’m hoping somebody can help. I have a wet speed fit UFH system, that controls 9 loops on the ground floor, each with a separate zone thermostat, flow valve and actuator. The problem I’m having is when the main programmer (which controls the entire system), is left on (I.e...
  19. B

    Winter DHW temp setting

    Morning everyone, Vokera gas combi boiler 35 degrees rising main 37 min to 60 max DHW temperature Top floor flat I turned my DHW dial on number 8 and took the hot water temperature from the kitchen sink and when tap was fully open it read at 51 degrees Celsius and when I reduced the tap flow...
    • BobbyJoe
    • Thread
    • america dhw setting temp usa winter
    • Replies: 0
    • Forum: USA
  20. I

    heating not reaching maximum temp

    I have 23 year old potterton suprima 60 with a danfoss flowshare 2 diverting valve and new programmer. I am experiencing short boiler operation of a minute or so before shutting down and then starting up again ( hunting?) Boiler thermostat maximum also room stat maximum but rads only getting...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock